MicroNet SP5001D Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Gateways / Controller MicroNet SP5001D herunter. MicroNet SP5001D User`s manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken

Inhaltsverzeichnis

Seite 1 - IP Telephony Gateway

User’s Manual IP Telephony Gateway Model No.: SP5001C, SP5001D, SP5002A, SP5012A World Wide Web: www.micronet.com.tw ; www.micronet.info

Seite 2 - Online Upgrade

9SP5012A: SP5012A Front Panel LED Status Description PWR On/Green Power On TEL On/Amber Line Registered LINE On/Amber Line Registered LAN On/Gr

Seite 3 - Table of Content

101.3 Application SP5001C: ● 1 RJ-11 FXS port is provided for phone set or PBX's trunk line connection ● 2 RJ-45 ports of 10/100M are prov

Seite 4

11SP5001D: ● 1 RJ-11 FXS port is provided for phone set or PBX's trunk line connection ● 1 RJ-11 PSTN port is provided to tranceive PSTN cal

Seite 5 - 1. Introduction

12VPN (Virtual Private Network) The IP telephony gateway series supports PPTP client for VPN function. It can establish VPN tunnel with PPTP server,

Seite 6 - 1.1 Key Features

132. Startup 2.1 Login into the System The embedded web configuration allows you to use a web browser to manage the IP Telephony gateway. Step

Seite 8

152.2 Network Configuration By default, the gateway is in NAT mode (router mode) and can share Internet access with PCs. Go to [ Network / WAN Set

Seite 9

16 ----------------------------------------------------------------------------------------------------- Parameter Description -------------------

Seite 10

172.3 SIP Configuration Go to [ SIP Settings / Service Domain ]. Each port can be configured to register 3 different service domains. ---------

Seite 11 - 1.3 Application

18 ----------------------------------------------------------------------------------------------------- Note: Please save and reboot the system to

Seite 12

1About this User’s Manual This User’s Manual gives users basic steps on installation and operation. Please read this manual chapter by chapter. C

Seite 13

192.4 VPN Configuration IP telephony gateway supports PPTP client for VPN. It can establish VPN tunnel with PPTP server. Go to [ Network / PPTP Set

Seite 14 - 2. Startup

20After tunnel is established, the gateway gets one private IP address (Interface 2) from PPTP server as shown in [ Network / Status ].

Seite 15

21 2.5 DDNS DDNS allows you to map the static domain name to a dynamic IP address. You must get an account, password and your static domain name fr

Seite 16 - 2.2 Network Configuration

223. Operation 3.1 Make a Call By default, call is sent via the first registrar server only. The telephone number of clients in the second/third s

Seite 17

23 3.2 Speed Dial / P2P call Speed dial Press <index> + # Go to [ Phone Book / Speed Dial Setting ]. User can create 10 entries (0~9) in

Seite 18 - 2.3 SIP Configuration

243.3 Call Forward Go to [ Phone Setting / Call Forward ]. There are 3 selections in Forward type. User must select the condition under which to fo

Seite 19

253.4 Call Hold / Call Waiting / Conference The IP telephony gateway provides telephony features, as call hold, call waiting, and 3-way conference.

Seite 20 - 2.4 VPN Configuration

26 3.5 FAX Send FAX ● Press <fax_number> to connect fax machine ● Start to send FAX T.38 FAX: Go to [ Phone Setting / T.38 (FAX) Setting

Seite 21

27 4. Web Administration 4.1 Phone Book Please refer to the section 3.2 Speed Dial / P2P call. 4.2 Phone Setting 4.2.1 Call Forward Please

Seite 22 - 2.5 DDNS

28 4.2.4 Block Settings User can set up the gateway to block incoming calls and the period. 4.2.5 Caller ID User can set the device to sho

Seite 23 - 3. Operation

2Table of Content 1. ..Introduction... 4 1.1 Key Features

Seite 24 - Press <index> + #

29 ----------------------------------------------------------------------------------------------------- Parameter Description -------------------

Seite 25 - 3.3 Call Forward

30* means: keypad* on the phone x means: digit 0, 1, 2~9 # means: keypad # on the phone + means: or Auto prefix: 02 (0000~9999) Input Sent out 221

Seite 26

31 4.2.9 T.38 (FAX) Setting Please refer to the section 3.5 FAX.

Seite 27 - 3.5 FAX

32 4.3 Network 4.3.1 Status User can check the current Network setting. 4.3.2 WAN Settings Please refer to the section 2.2 Network Configura

Seite 28 - 4. Web Administration

33----------------------------------------------------------------------------------------------------- Parameter Description ---------------------

Seite 29 - 4.2.6 Dial Plan Setting

344.3.6 PPTP Settings Please refer to the section 2.4 VPN Configuration. 4.3.7 DMZ * Open another page http://192.168.123.1:9999/dmzset.htm. Wi

Seite 30

354.4 SIP Settings 4.4.1 Service Domain Please refer to the section 2.3 SIP Configuration. 4.4.2 Port Settings User can set up SIP and RTP po

Seite 31 - 4.2.8 Call Waiting Setting

36 4.4.4 Codec ID Settings User can set up codec ID for different codec. This ID represents the codec used to encode data in the Track. 4.4.5

Seite 32 - 4.2.9 T.38 (FAX) Setting

37Symmetric Response Routing. This behavior is not desirable in many cases. Please configure it according to your service provider. 4.4.7 Other

Seite 33 - 4.3 Network

38EF (Expedited Forwarding). ----------------------------------------------------------------------------------------------------- SIP expire time

Seite 34 - 4.3.5 VLAN Settings

34.3.7 DMZ * ... 34 4.3.8 Virtual Server *

Seite 35 - 4.3.8 Virtual Server *

394.6 Others 4.6.1 Auto Config User can disable Auto Configuration or enable the function by TFTP/FTP. Please contact with your service provider

Seite 36 - 4.4 SIP Settings

404.7 System Auth. Change system login name and password. 4.8 Save Change Click on the Save button. The system will automatically restart and

Seite 37 - 4.4.6 RPort Setting

41 Click on the Update button to start upgrading. 4.9.2 Default Setting Click on the Restore button. Then, the system will restore factory defa

Seite 38 - 4.4.7 Other Settings

425. IVR / Keypad Management You can use the PSTN phone keypad to operate the IP Telephony gateway. Please follow the instruction to configure. IV

Seite 39 - 4.5 NAT Trans. / STUN

43Use the * (star) key when entering a decimal point. Set Network Mask #113xxx*xxx*xxx*xxx# Enter value-using numbers on the telephone keypad. Use

Seite 40 - 4.6 Others

446. Specification Model SP5001C SP5001D SP5002A SP5012A Standard IETF SIP (RFC3261) Telephone Port 1 FXS 1 FXS 1 PSTN (lifeline) 2 FXS 1 F

Seite 41 - 4.9 Update

41. Introduction Micronet SP5001C, SP5001D, SP5002A and SP5012A IP Telephony Gateway is designed to connect standard telephone devices to IP-based

Seite 42 - 4.10 Reboot

5 1.1 Key Features z Compliant with IETF SIP standards z Provide 2 10/100M RJ-45 ports for WAN and LAN connection z Support G.729a/b, G.711a/µ-l

Seite 43 - 5. IVR / Keypad Management

6 1.2 Physical Description SP5001C: SP5001C Front Panel LED Status Description PWR On/Green Power On STATUS On/Amber Line Registered TEL On/

Seite 44

7SP5001D: SP5001D Front Panel LED Status Description PWR On/Green Power On PSTN On/Amber PSTN mode / VoIP Unregistered TEL On/Amber Phone se

Seite 45 - 6. Specification

8SP5002A: SP5002A Front Panel LED Status Description PWR On/Green Power On TEL1 On/Amber Line Registered TEL2 On/Amber Line Registered LAN On/

Kommentare zu diesen Handbüchern

Keine Kommentare