MicroNet SP888C Spezifikationen Seite 102
- Seite / 116
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
24395
2009
2010
100
INSTRUMENTATION
▼ GENERAL CHARACTERISTICS
The LAN Cable Tester – continuity check – is a handy, low cost device for checking the conditions and operation of networks. With
its attractive design, it is equipped with a handy case to protect both the main and the remote units. It is specifically designed for
fast testing of mapping, polarisation, and continuity of pairs as well as data cable screening (as per EIA/TIA 568A&B).
It is equipped with RJ45 inputs on both the main and remote units, for connecting the section of circuit being tested. It is powered
with a normal 9 V battery. The LAN Cable Tester runs an automatic scan of any kind of cable equipped with RJ45 or RJ12 or RJ11
connectors. Furthermore, the remote terminal (separate from the central unit) makes it easy to test a channel which has already
been installed: a considerable advantage for maintenance technicians.
THE TESTER DETECTS THE FOLLOWING FAULTS:
• Open circuit • Crossed pairs
• Short circuit • Divided pairs, for cable runs from 0.5 to 200 metres
• Swapped wires of a given pair • Open cable screen
• PAIRS LED (GREEN) Indicates LAN cable twisted pairs. Pairs 1/2, 3/6, 4/5, 7/8 are all processed during the test.
• SCREEN LED (GREEN) Turns on when the screen of a cable is connected. Turns off when the cable is either not screened
or the screen is open.
• FAULT LED (RED) Indicates a fault on the pair of the LAN cable being tested.
The following four faults are highlighted on the front of the tester:
SHORT CIRCUIT : One of the wires of the pair is shorted somewhere along the length of the cable or at the connector.
SWAPPED: The two wires of a twisted pair have been swapped (e.g. 1-2 and 2-1)
CROSSED: Two complete pairs have been swapped (e.g. pair 1/2 run to 4/5 and 4/5 to 1/2)
DIVIDED PAIRS: Wires belonging to two different pairs have been used to make a connection.
This fault means that the connection is not between pairs and the advantages of twisted connections
are thereby lost.
• BATTERY LOW LED (RED) Turns on when the 9V battery charge is low.
• TEST BUTTON Press the button to test the LAN cable.
A RED LED indicates the type of fault detected on the pair being tested. If one of the GREEN LED’s does not light up (it is skipped
over during the test) this means that the pair in question has an OPEN wire. For a pair to pass the test, ALL GREEN LED’s must light
up, and NO RED LED may light up.
TESTING AND IDENTIFYING THE FAULT
Automatic quick test function – Press the test button for a moment to run an automatic test cycle. The result is displayed perma-
nently. The result can be one of the following:
a) ALL GREEN LEDS ON, NO RED LEDS ON: the cable is OK
b) ONE GREEN LED OFF: One wire of the pair is OPEN
c) ONE GREEN LED OFF and ONE RED LED ON: The pair associated to the green led (off) has a fault and the red led indicates
the type of fault
IMPORTANT - Do not connect the tester of the terminal while any end of the cable is still connected to any other device. This pre-
vents damage to the equipment or tester itself.
APPLICATION:
• Data transmission cable continuity check • RJ45 socket crimping check
REFERENCE STANDARDS:
• ISO 11801 2 edition (General systems) • EN 50173-1 (Cabling systems)
• EIA/TIA 568B (Cat. 6 installations) • 306-10 (Residential cabling guide)
• IEC 61935-1 (General systems)
LAN CABLE TESTER
■ LAN Continuity Tester
Code Description Package Pack Pcs
24395 LAN Continuity Tester Blister 1
- Cabling System 1
- THE ENERGY 3
- Our products are 5
- PRESENTATION 1 6
- CONTENTS 7
- QUICK GUIDE 8
- INTRODUCTION 10
- CABLING SYSTEM 10
- STANDARDS MAPS 12
- Training 13
- CONCEPT SYSTEM 14
- LAN CABLES 15
- U/UTP Cat. 5e 16
- F/UTP Cat. 5e 17
- SF/UTP Cat. 5e 18
- U/UTP Cat. 5e FLEX 19
- Black PE sheath 20
- F/UTP Cat. 5e - Double screen 22
- Isolation PVC GR° 4 BLUE 22
- U/UTP Cat. 6 23
- F/UTP Cat. 6 24
- SF/UTP Cat. 6 25
- F/UTP Cat. 6 - Double screen 27
- F/FTP and S/FTP Cat. 6A 31
- 550 Mhz 10 Gigabit 31
- S/FTP Cat. 7 10 Gigabit 32
- TRANSMISSIVE PARAMETERS 33
- FURTHER INFORMATION 34
- OPTICAL FIBRE 35
- Codes and structure 36
- Multitube optical fibre 39
- OPTICAL FIBRE CABLES 40
- ENCLOSURES 43
- TITLE Ref 44
- TITLE Ref 44
- GREENET ENCLOSURES AND PANELS 45
- GREENET 19" WALL PANELS 46
- GREENET 19" 47
- SWING OUT PANELS 47
- 19" OPEN RACKS 49
- RACK EASYNET 50
- GREENET: modularity 51
- Complete, ready-to-use 52
- NET enclosure kit Cat. 5e 53
- CABINET ACCESSORIES 54
- IDENTIFICATION SYSTEMS 55
- 19" ROTARY RACKS 56
- DRAWERS FOR ENCLOSURES 57
- MISCELLANEOUS ACCESSORIES 58
- VENTILATION PANELS 58
- POWER BARS 60
- METAL POWER BARS 61
- WORK AREA ACCESSORIES 62
- • Telephone switching 63
- TELEPHONE SWITCHING 64
- SYSTEMS (Phone System) 64
- SYSTEM 5e 65
- DATA SYSTEM 5e 66
- SWITCHING SYSTEM 66
- PATCH PANEL 67
- PATCH CORDS 68
- TYPE 110 SWITCHING SYSTEM 69
- THE IMPORTANCE OF EXPERT 70
- INSTALLATION 70
- SYSTEM 6 71
- DATA SYSTEM 6 72
- UTP Cat. 6 patch cord 73
- FTP Cat. 6 patch cord 73
- Cable clamp pliers 74
- Plug pliers 74
- Keystone jack pliers 74
- Cable strippers 74
- Safety base 74
- SYSTEM 6A 75
- DATA SYSTEM 6A 10 GIGA 76
- SISTEMA DI PERMUTAZIONE 76
- DESIGN BASICS 77
- RJ45 SOCKETS 78
- RJ45 PLUG 78
- • Optical fibre connectors 79
- • Pigtails 79
- • Optical fibre patch cords 79
- OPTICAL FIBRE CONNECTORS 80
- AND SOCKETS 80
- PIGTAILS - OPTICAL 81
- JUNCTION BOXES 81
- OPTICAL FIBRE PATCH CORDS 82
- LIGHT SYSTEM 83
- OPTICAL FIBRE CONNECTION 84
- ACCESSORIES 84
- Cable termination accessories 85
- MPO SYSTEM 86
- TOWER TECH 87
- TOWERTECH 88
- TECHNICAL CHARACTERISTICS 89
- OPTIONAL ACCESSORIES 89
- CUSTOMISATION 89
- Four holes 90
- Data cable 90
- Power cable 90
- “TOWER TECH” SERIES COLUMNS 91
- AND TOWERS 91
- MULTIPLE SOCKETS 92
- NETWORKING 93
- NETWORKING MICRONET 94
- 10/100 Mbps Switch 95
- 1000 Mbps mini-GBIC module 96
- (SNMP/RMON/WEB/Telnet) 97
- (SNMP/RMON/Web/Telnet) 97
- WIRELESS 2.4 GHz - 108 MB 98
- WIRELESS 2.4 GHz - 54 MB 98
- Electronic spectrun analyzer 98
- ADSL 2/2+ 99
- INTERNET CAMERA 100
- INSTRUMENTATION 101
- LAN CABLE TESTER 102
- DATA NETWORK TESTER 103
- FURUKAWA S122 FUSION 106
- PALMTOP OTDR EXFO FTB-200 107
- FANTONET CUSTOMER SERVICE 108
- The strength of innovation 112
- Innovation 113
- Automated 113
- The energy 114
- ...to products 115
- FANTON SpA 116
Verwandte Produkte und Handbücher für Vernetzung MicroNet SP888C
Vernetzung MicroNet SP3524A Betriebsanweisung
(155 Seiten)
(155 Seiten)
Vernetzung MicroNet SP5054 Bedienungsanleitung
(56 Seiten)
(56 Seiten)
(6 Seiten)
Vernetzung MicroNet SP906GK Bedienungsanleitung
(30 Seiten)
(30 Seiten)
Philips FC0038836 podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Oświetlenie Philips FC0038836.
Dostarczamy 1 pdf podręczników Philips FC0038836 do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Kommentare zu diesen Handbüchern