MicroNet Fibre to SAS/SATA II RAID Subsystem Bedienungsanleitung Seite 28
- Seite / 160
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
FIBRE-to-SAS/SATA RAID SUBSYSTEM
28
User Manual
For PRO-90-6601 SES board:
NOTE: The upgrade process is done twice. The first time needs a
jumper in JP8. The second time does not need a jumper.
1. Power off the RAID system. Remove the SES Module. Insert a jumper in JP8 of
SES board PRO-90-6601.
2. Insert the SES module into the RAID subsystem. Connect RS232 serial cable to
the RS232 port of SES module.
3. Power on RAID subsystem. Configure terminal settings as follows:
Baud Rate: 38400
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
4. Open terminal console. Type “proses upgrade”.
- User Manual 1
- Table of Contents 2
- Preface 6
- Before You Begin 7
- Chapter 1 Introduction 9
- 1.2 Enclosure Chassis 11
- 2.1 Controller Module 13
- For PRO-90-5601 SES board: 26
- 2.4 Drive Carrier Module 32
- 2.5 LCD Display Panel 36
- Environmental Status 37
- 2.7 Backup Battery Unit 49
- Chapter 4 RAID Levels 54
- RAID 1 – Mirroring 55
- Chapter 5 proRAID Manager 57
- Miscellaneous 62
- Expanders 63
- Logical Volumes 64
- 5.4 Screen Template 66
- Chapter 6 RAID Management 67
- 6.1.2.1 Read Cache Data 69
- 6.1.2.3 Write Cache Data 69
- 6.1.2.4 Disk Caching 70
- 6.1.3 RAID Profile Usage 71
- 6.1.4.1 Disabled 73
- 6.1.4.2 ASAP 73
- 6.1.4.3 Background 73
- 6.2 Creating a RAID 74
- 6.3 View RAID Set 80
- 6.4 Modify/Delete RAID Set 83
- 6.4.2 Deleting the RAID 85
- 6.4.3 Renaming the RAID 86
- 6.5 Expanding a RAID 87
- 6.6 Rebuilding a RAID 89
- 6.7 Verifying a RAID 90
- 6.8 Sparing Strategy 91
- 6.8.2 Deleting a Hot Spare 93
- 6.8.3 Viewing Hot Spares 94
- 6.9 RAID Ownership 95
- View Logical Volumes 101
- 7.4 Host Mapping 109
- Chapter 8 Monitoring 112
- 8.2 Disks 115
- 8.2.1.1 Disk Status 116
- 8.2.2 Disk Errors 117
- 8.3 Port Statistics 118
- 8.4 Event Log 120
- Chapter 9 Administration 122
- 9.2 Fibre Channel Config 123
- 9.3 Ethernet Configuration 125
- 9.5 SNMP Configuration 129
- 9.6 Change Password 131
- 9.7 Update Firmware 132
- 9.8 Reset Controller 133
- 9.9 Telnet 134
- 9.11 Config Save/Restore 136
- 9.12 Export Status 137
- 9.13 Set Date and Time 138
- 9.14 Setup Wizard 139
- Chapter 10 Troubleshooting 140
- 10.2 Alert Messages 144
- 10.2.2 Warnings 146
- Appendix 149
- For SES2 board PRO-90-5601: 151
- For PRO-90-6601 SES board: 154
Verwandte Produkte und Handbücher für RAID-Kontroller MicroNet Fibre to SAS/SATA II RAID Subsystem
(138 Seiten)Philips FC0037836 podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Oświetlenie Philips FC0037836.
Dostarczamy 1 pdf podręczników Philips FC0037836 do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Kommentare zu diesen Handbüchern