MicroNet SP5004 Bedienungsanleitung PDF herunterladen (Seite 27)

Setup the FXS Gateway:

1. Open the web browser to connect the gateway and select the [Network

Interface]

2. Change the IP Address, assign the IP address depends on your NAT router

settings. If the NAT Router LAN IP is 192.168.1.1, then the Gateway’s IP must

be set as 192.168.1.x , then enter the Subnet Mask as 255.255.255.0

Note: The static IP must configured on the Gateway in this application

3. Change the Default routing gateway IP Address. Here means your router’s LAN

IP address, for example: 192.168.1.1

4. Enable the [IP Sharing], enter the IP Sharing Server Address, here means

the router’s WAN IP address, for example: 61.219.198.204, then Click the

button

5. Select [Commit Data] and click button.

6. Select [Reboot System] and click

button.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 85 86

Keine Kommentare

MicroNet SP5004 Bedienungsanleitung Seite 27