MicroNet SP5004 Bedienungsanleitung Seite 75
- Seite / 86
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
6.15. [voice]
The voice command is associated with the audio setting information.
usr/config$ voice
Voice codec setting information and configuration
Usage:
voice [-send [G723 ms] [G711U ms] [G711A ms] [G729 ms] ]
[-volume [voice level] [input level] [dtmf level]]
[-nscng [G711U used1] [G711A used2] [G723 used3]]
[-echo used] [-mindelay t1] [-maxdelay t2]
voice -print
voice -priority [G723] [G711U] [G711A] [G729]
-print Display voice codec information and configuration.
-send Specify sending packet size.
G.723 (30/60 ms)
G.711U (20/40/60 ms)
G.711A (20/40/60 ms)
G.729 (20/40/60/80 ms)
-priority Priority preference of installed codecs.
G.723
G.711U
G.711A
G.729
-volume Specify the following levels:
voice volume (0~63, default: 25),
input gain (0~38, default: 25),
dtmf volume (0~31, default: 23),
-nscng No sound compression and CNG. (G.723.1 only, On=1, Off=0).
-echo Setting of echo canceller. (On=1, Off=0, per port basis).
-mindelay Setting of jitter buffer min delay. (0~150, default: 90).
-maxdelay Setting of jitter buffer max delay. (0~150, default: 150).
Example:
voice -send g723 60 g711u 60 g711a 60 g729 60
voice -volume voice 20 input 32 dtmf 27
voice -echo 1 1 1 1
Parameter Usage:
-print
Shows the current settings
-send
To define packet size for each codec. 20/40/60/80 ms means to
send a voice packet per 20/40/60/80 milliseconds. The smaller the
packet size, the shorter the delay time. If network is in good
condition, smaller sending packet size is recommended. In this
parameter, 20/40/60ms is applicable to G.711u/a law, 20/40/60ms
is applicable to G.729 codec, while 30/60ms is applicable to
G.723.1 codec.
74
- IP Telephony Gateway 1
- Table of Contents 2
- About this User’s Manual 4
- 1. Introduction 5
- 1.2. Features 6
- 1.3. Default Settings 7
- 1.4. Appearance 8
- SP5004/S 9
- 1.5. LED Status 10
- 2. Setting Up the Gateway 11
- Communication 13
- A. PPPoE Connection Setup 18
- 2.4. Proxy Mode Setup 21
- 2.6. P2P Connection Example 25
- 3. Advanced Setup 26
- Setup the FXS Gateway: 27
- Setup the NAT router: 28
- 3.2. Codec Selection 30
- 4. Firmware Upgrade 32
- 4.1. TFTP Server Setup 33
- 5. WEB Configuration Menu 40
- 5.1. Network Interface 41
- 5.2. SIP Information 43
- 5.3. System Configuration 45
- 5.4. PPPoE Configuration 46
- 5.5. Voice Configuration 47
- 5.7. Support Configuration 51
- 5.8. Prefix Configuration 52
- 5.10. DSCP Configuration 54
- 5.11. Password Configuration 56
- 5.12. ROM Upgrade 57
- 5.13. Flash Clean 58
- 5.14. Commit Data 58
- 5.15. Reboot System 58
- 6. Command List 59
- 6.1. [help] 60
- 6.2. [quit] 60
- 6.3. [debug] 61
- 6.4. [reboot] 62
- 6.5. [commit] 62
- 6.6. [ifaddr] 63
- 6.7. [time] 65
- 6.8. [ping] 65
- 6.9. [pbook] 66
- 6.10. [pppoe] 68
- 6.11. [flash] 69
- 6.12. [sysconf] 70
- 6.13. [sip] 72
- 6.14. [security] 74
- 6.15. [voice] 75
- 6.16. [support] 77
- 6.17. [tos] 78
- 6.18. [phone] 79
- 6.19. [bureau] 81
- 6.20. [rom] 82
- 6.21. [passwd] 84
- 6.22. [line] 85
- 6.23. [prefix] 86
Verwandte Produkte und Handbücher für Gateways / Controller MicroNet SP5004
(84 Seiten)Philips FC0026836 podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Oświetlenie Philips FC0026836.
Dostarczamy 1 pdf podręczników Philips FC0026836 do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Kommentare zu diesen Handbüchern