MicroNet SP5004 Bedienungsanleitung Seite 70
- Seite / 86
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
6.12. [sysconf]
This command displays system information and configurations.
usr/config$ sysconf
System information and configuration
Usage:
sysconf [-print] [-idtime digit] [-bf digit] [-keypad dtmf]
[-faxtype type][-2833type type][-lcdrop ON/OFF]
[-droptime digit][-eod digit] [-callerid type]
[-service used][-dtmfstart digits] [-dtmfend digits]
sysconf -print
-print Display system overall information and configuration.
-idtime Inter-Digits time.(1~10 sec)
-service Specify gateway service type. (0: Dial in service,
1: HotLine service.)
-bf BusyForward.(ON:1 / OFF:0)
-keypad Select DTMF type: 0=In-band,
1=RFC2833.
-faxtype FAX Payload Type (range:96~128 inter-used:100,102~105)
-2833type RFC2833 Payload Type (range:96~128 inter-used:100,102~105)
-lcdrop Disconnect Supervision(Loop Current Drop) (ON:1 / OFF:0)
-droptime Period of Loop Current Drop (ms)
-eod End of Dial Digit setting(0: none, 1: *, 2: #)
-callerid Caller ID Type setting, 0: Disable,
1: FSK(BELLCORE),
2: DTMF.
-dtmfstart DTMF CallerID Start Symbol.
-dtmfend DTMF CallerID End Symbol.
-ivr IVR Auto Hang up (0:Disable /1:Tone /2:reverse )
Example:
sysconf -keypad 0 -eod 2 -callerid 1
Parameter Usage:
-print
Show the sysconf current status.
-idtime
Set the duration (in second) of two pressed digits in dial mode as
timed out. If after the duration user hasn’t pressed next number, it
will dial out all number pressed (1-10 seconds).
-service
Specify gateway service type. (0: Dial in service, 1: HotLine
service.)
-bf
Busy Forward function
69
- IP Telephony Gateway 1
- Table of Contents 2
- About this User’s Manual 4
- 1. Introduction 5
- 1.2. Features 6
- 1.3. Default Settings 7
- 1.4. Appearance 8
- SP5004/S 9
- 1.5. LED Status 10
- 2. Setting Up the Gateway 11
- Communication 13
- A. PPPoE Connection Setup 18
- 2.4. Proxy Mode Setup 21
- 2.6. P2P Connection Example 25
- 3. Advanced Setup 26
- Setup the FXS Gateway: 27
- Setup the NAT router: 28
- 3.2. Codec Selection 30
- 4. Firmware Upgrade 32
- 4.1. TFTP Server Setup 33
- 5. WEB Configuration Menu 40
- 5.1. Network Interface 41
- 5.2. SIP Information 43
- 5.3. System Configuration 45
- 5.4. PPPoE Configuration 46
- 5.5. Voice Configuration 47
- 5.7. Support Configuration 51
- 5.8. Prefix Configuration 52
- 5.10. DSCP Configuration 54
- 5.11. Password Configuration 56
- 5.12. ROM Upgrade 57
- 5.13. Flash Clean 58
- 5.14. Commit Data 58
- 5.15. Reboot System 58
- 6. Command List 59
- 6.1. [help] 60
- 6.2. [quit] 60
- 6.3. [debug] 61
- 6.4. [reboot] 62
- 6.5. [commit] 62
- 6.6. [ifaddr] 63
- 6.7. [time] 65
- 6.8. [ping] 65
- 6.9. [pbook] 66
- 6.10. [pppoe] 68
- 6.11. [flash] 69
- 6.12. [sysconf] 70
- 6.13. [sip] 72
- 6.14. [security] 74
- 6.15. [voice] 75
- 6.16. [support] 77
- 6.17. [tos] 78
- 6.18. [phone] 79
- 6.19. [bureau] 81
- 6.20. [rom] 82
- 6.21. [passwd] 84
- 6.22. [line] 85
- 6.23. [prefix] 86
Verwandte Produkte und Handbücher für Gateways / Controller MicroNet SP5004
(84 Seiten)Philips FC0026836 podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Oświetlenie Philips FC0026836.
Dostarczamy 1 pdf podręczników Philips FC0026836 do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Kommentare zu diesen Handbüchern