MicroNet SP5058 Bedienungsanleitung PDF herunterladen (Seite 19)

-17-

 Administrator password: type in the new password into this field, and re-enter it for

confirmation purposes in the field below.

 Isolation: select Enable or Disable. By enabling this feature, wireless clients associated

with the Access Point will be able to connect to each other.

 Allow upgrade uploads: this Bridge can be upgraded via TFTP, therefore place a check

in this box if you would like to upgrade this device. It is recommended that this box is

unchecked during normal operation, when it does not need to be upgraded.

 Click on the Save button to confirm the changes. You must reboot the Bridge in order

for these new settings to take affect.

 Reset to factory defaults: click on this button to reset the Access Point to its factory

default settings.

 Switch to Bridge: click on this button to switch to Bridge mode.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26

Keine Kommentare

MicroNet SP5058 Bedienungsanleitung Seite 19